Anti-Vibration Machinery Shock Mounts & Vibration Damper

Various sizes and stud types available. Alternative Elastomers available for special order in CR, NBR, EPDM or NR

Consists of 2 parts; a rubber ring and a rubber bush bonded to a central metal spacer.

AD shear compression mounts, designed to achieve high damping under compressive loads.

Flanged mounting which uses rubber in shear and compression. Ideal for where a fail-safe mounting is essential.

Originally designed for mounting marine engines; therefore they can be used for many mobile and static applications.

Achieves high isolation values of low frequency vibration. Attenuates shock loadings due to its deflection capacity.

Designed to stop twisting in installations. Suited to applications where primary load is in vertical compression.

Ultimate in Small Motor elastomeric focalised support. They have very high deflection for a relatively small mounting.

The KPM 16539 mount has a low profile combined with relatively high deflection.

Sandwich mountings, suited to both compression and shear loading.

Center Bonded Mounts isolate vibration; reduce shock and noise due to vibration that is structure borne.

A compact fail safe design, Cutouts in rubber section on various sizes provide different vertical/horizontal stiffness ratios.

Good properties for reduce low and medium frequencies. Wide range allows optimum selection for individual machines.

They allow the elimination, in particular, of the high frequencies through the elastic deflection of the rubber under the effect of the external couples which act on the metalic tubes.

Two concentric sleeves with rubber securely bonded between them. Designed to take up axial and radial loads as well as torsional movements.

The DP Mounts are highly deformable, which allows for a high degree of energy to be absorbed on impact.

A specially compounded low hardness anti-vibration pad for reducing vibrations.

The mounts work in Compression (axial) and Shear (radial). 80% Reduction of Energy due to Vibration.

The Rectangular Mounts is designed as hard rubber stops and damper for static equipment.

For attenuating the vibration of equipment, which are subject to displacement during operation.

The mounts can be used in cases where the product is subjected to high torsion and stress during operation.

F-type mounts are designed for vibratory equipment to give maximum isolation.

Circular Mount with centre hole. Stainless steel metal plate is available on request.

The KPN Pedestal mount is designed for use on alternators and static generators.