Rubber Sheets Technical Grade.

Polymax BS 5400 Bridge Bearing Grade Rubber Sheet

5400 grade meets and exceeds the requirements against Part 9 of BS5400 for materials used in manufacture, installation of bridge bearings.

Polymax TEKNA Low Hardness Technical NR Rubber Sheet

For applications which require (low hardness) soft rubber with excellent mechanical properties, ideal where high abrasion resistance is required.

Polymax OPTIMA Para Rubber Sheet In NR/SBR

Polymax OPTIMA also has very good mechanical and abrasion resistance properties.

Polymax TITANO Technical Grade CR Rubber Sheet

Ideal for contact with animal and vegetable fats and oils, waxes and greases. Resistance to the ageing effects of ozone, sunlight and atmosphere.

COSMA Low Hardness Chloroprene Sheeting

Properties similar to Polymax PRIMA general purpose CR rubber sheet, especially designed for applications where soft rubber is essential.

ARIA Technical Grade NBR Rubber Sheet

Resistance to hydraulic fluids, aliphatic hydrocarbons, mineral oils, silicone, vegetable oils etc.

Polymax ZIGMA Butyl Rubber Sheet

For applications which require low rates of gas permeability, good resistance to chemical attack by acids and alkalis.

Polymax HYPALON® Rubber Sheet

Developed as a specialty rubber for rugged applications. Described as a "super" Neoprene, with similar but better developed characteristics.

Polymax Viton® Rubber Sheet

Excel all other Polymax rubber sheets in overall resistance to combinations of light, heat, ozone, solvents and aggressive chemicals.

Also see: Rubber Adhesives

Available for use on various applications

*Dimension can vary they are typical only

*New Saturday Opening Hours*
Opening Hours: Mon-Fri: 8am-6pm Sat: 8.30am-5pm