ANTI-VIBRATION RANGE

 

download pdf catalogue[download our Anti-Vibration Mounts Catalogue]
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Various sizes and stud types available. Extra available to special order are: Alternative Elastomers CR, NBR, EPDM or NR
To Cylindrical anti vibration mounts Page
Cylindrical Anti Vibration Mounts
Flanged mounting which uses rubber in shear and compression. Ideal for where a fail-safe mounting is essential.
To KPR anti vibration mounting Page
KPR Anti Vibration Mounting
Consists of 2 parts; a rubber ring and a rubber bush bonded to a central metal spacer.
To Universal mounts Page
Universal mounts, KPUM
AD shear compression mounts, designed to achieve high damping under compressive loads.
To AD Waisted Shear Compression Mount Page
AD Shear Compression Mount
Originally designed for mounting marine engines; therefore they can be used for many mobile and static applications.
To KMR anti-vibration mounting Page
KMR Anti Vibration Mounting
Achieves high isolation values (both active and passive) of low frequency vibration. Attenuates shock loadings due to its deflection capacity.
To SCM anti vibration mounting Page
SCM Mounts
With special metal part for stop twisting in installations.Suited to applications where primary load is in vertical compression
To AD Waisted Shear Compression Mount Page
Hexagon Anti Vibration Mounts
Ultimate in Small Motor elastomeric focalised support. They have very high deflection for a relatively small mounting.
To AMV Angle anti-vibration mounting Page
AMV Angle Anti Vibration Mount
The KPM 16539 mount has a low profile combined with relatively high deflection.
To Pedestal anti vibration mount Page
Pedestal Anti Vibration Mounts
Sandwich mountings, suited to both compression and shear loading, can be made in 4 shore hardness values: 45, 50, 60 & 70 and four main sizes.
To Anti Vibration Sandwich Mountings Page
Anti Vibration Sandwich Mount
Center Bonded Mounts isolate vibration; reduce shock and noise due to vibration that is structure borne.
To Centre Bonded Bush Page
TB Center Bonded Bush
A compact fail safe design, Cutouts in rubber section on various sizes provide different vertical/horizontal stiffness ratios.
To Cab anti-vibration mounting Page
Cab Anti Vibration Mounting
Made from 65 Shore Rubber. Good properties for reduce low and medium frequencies. Wide range allows optimum selection for individual machines.
To FMR machinery mount Page
FMR Machinery Mount
Made from 65 Shore Rubber. Good properties for reduce low and medium frequencies. Food, agricultural and chemical industries.
To FMG and FMSS machinery mount Page
FMG and FMSS Machinery Mount
Made from 75 Shore synthetic rubber. Provides long life. FMB Mount absorbs shocks from all sides.
To FMB machinery mountings Page
FMB Machinery Mount
They allow the elimination, in particular, of the high frequencies through the elastic deflection of the rubber under the effect of the external couples witch act on the metalic tubes
To Semi bonded KPCB bushes Page
Semi Bonded KPSB bush
Two concentric sleeves with rubber securely bonded between them. Designed to take up axial and radial loads as well as torsional movements.
To Fully bonded KPCB bush Page
Fully Bonded KPCB bush
Polymax machinery foot mounts isolate vibration; reduce shock and noise due to vibration that is structure borne.
Anti-Vibration Rubber Feet / Foot Mount Dampner
Polymax Machinery Foot Mount
The DP Mounts are highly deformable, which allows for a high degree of energy to be absorbed on impact
Anti-Vibration Rubber Feet / Foot Mount Dampner
Polymax Buffer Springs
A specially compounded low hardness anti-vibration pad for reducing vibrations
Anti-Vibration Pad Matting
Anti-Vibration Pad, the Polymax Anchor Mat
The mounts work in Compression (axial) and Shear (radial). 80% Reduction of Energy due to Vibration.
To TH Flexible Locator Mount Page
TH Flexible Locator Mount
Rectangular Mount
Rectangular Mount

For attenuating the vibration of equipment,which are subject to displacement during operation.Due to their design DS/ES are excellent.

CONCAVE BUFFER DS & ES
Concave Buffer DS & ES

The mounts can be used in cases where the product is subjected to high torsion and shear stress during operation.

KBR Compactor Mounts
KBR Compactor Mounts

O-Rings, Circlips and Bonded Seal Kits.
Circlips and O-Ring Kits
Also See..
The FMD mount is a specially designed machinery foot, capable of isolating a greater range of frequencies than standard foot mount.
To TH Flexible Locator Mount Page
FMD High Deflection Machinery Foot
[ For Rubber Fenders click here]
[Torque Loading - AV Mounts]
*Dimension can vary they are typical only

Polymax Ltd,  Building 90, SEME, Budds Lane, Bordon, Hampshire GU35 0JE. 
Tel.: 01420 474123.  Fax: 01420 487816. 
Email: sales@polymax.co.uk
Verisign  Verified By Visa  Mastercard Mastercode  Credit Debit Cards accepted  Valid XHTML 1.0 Transitional  Valid CSS!  Level A conformance icon, W3C-WAI Web content Accessibility Guidelines 1.0