Anti-Vibration Range

[download our Anti-Vibration Mounts Catalogue]

Cylindrical Anti Vibration Mounts

Various sizes and stud types available. Extra available to special order are: Alternative Elastomers CR, NBR, EPDM or NR

KPR Anti Vibration Mounting

Flanged mounting which uses rubber in shear and compression. Ideal for where a fail-safe mounting is essential.

Universal mounts, KPUM

Consists of 2 parts; a rubber ring and a rubber bush bonded to a central metal spacer.

AD Shear Compression Mount

To AD Waisted Shear Compression Mount Page

AD shear compression mounts, designed to achieve high damping under compressive loads.

KMR Anti Vibration Mounting

Originally designed for mounting marine engines; therefore they can be used for many mobile and static applications.

SCM Mounts

Achieves high isolation values (both active and passive) of low frequency vibration. Attenuates shock loadings due to its deflection capacity.

Hexagon Anti Vibration Mounts

With special metal part for stop twisting in installations.Suited to applications where primary load is in vertical compression.

AMV Angle Anti Vibration Mount

Ultimate in Small Motor elastomeric focalised support. They have very high deflection for a relatively small mounting.

Pedestal Anti Vibration Mounts

The KPM 16539 mount has a low profile combined with relatively high deflection.

Anti Vibration Sandwich Mount

Sandwich mountings, suited to both compression and shear loading, can be made in 4 shore hardness values: 45, 50, 60 & 70 and four main sizes.

TB Center Bonded Bush

Center Bonded Mounts isolate vibration; reduce shock and noise due to vibration that is structure borne.

Cab Anti Vibration Mounting

A compact fail safe design, Cutouts in rubber section on various sizes provide different vertical/horizontal stiffness ratios.

FMR/FMB/FMG/FMSS Machinery Foot Mount Range

Made from 65 Shore Rubber. Good properties for reduce low and medium frequencies. Wide range allows optimum selection for individual machines.

Semi Bonded KPSB bush

They allow the elimination, in particular, of the high frequencies through the elastic deflection of the rubber under the effect of the external couples witch act on the metalic tubes.

Fully Bonded KPCB bush

Two concentric sleeves with rubber securely bonded between them. Designed to take up axial and radial loads as well as torsional movements.

Polymax Buffer Springs

Anti-Vibration Rubber Feet / Foot Mount Dampner

The DP Mounts are highly deformable, which allows for a high degree of energy to be absorbed on impact.

Anti-Vibration Pad, the Polymax Anchor Mat

A specially compounded low hardness anti-vibration pad for reducing vibrations.

TH Flexible Locator Mount

The mounts work in Compression (axial) and Shear (radial). 80% Reduction of Energy due to Vibration.

Rectangular Mount

The Rectangular Mounts is designed as hard rubber stops and damper for static equipment.

Concave Buffer DS & ES

For attenuating the vibration of equipment,which are subject to displacement during operation. Due to their design DS/ES are excellent.

KBR Compactor Mounts

The mounts can be used in cases where the product is subjected to high torsion and shear stress during operation.

KP Series Mounts

Designed to take vertical shock load damping for mobile and static equipment and is available with and without top steel support plate.

F-type Shear & Compression Mounts

F-type mounts are designed for vibratory equipment to give maximum isolation.

KPN-type Pedestal Mount

KPN Pedestal mount is designed for use on alternators and static generators.

Also See..

O-ring and bonded seal kits and circlip sets

*Dimension can vary they are typical only

*New Saturday Opening Hours*
Opening Hours: Mon-Fri: 8am-6pm Sat: 8.30am-5pm