For UK enquiries please visit polymax.co.uk or contact us on 01420 474123 | Email sales@polymax.co.uk
+44 (0) 1420 474123
£ GBP
£ British Pound Sterling (GBP)
Change currency:
  • € Euro (EUR)
  • Rs Indian Rupee (INR)
  • zł Polish Zloty (PLN)
  • $ US Dollar (USD)

sales@polymax.co.uk
You have no items in your shopping cart.
0
Cart

MOD AFS Silicone Sponge Sheet

Not Available to Buy Online - Please contact us for more information.

 +44 (0) 1420 474123
 sales@polymax.co.uk

Be the first to review this product

Quick Overview

Heat resistant sponge that meets the MOD AFS 1682-A specification.

Rubber sheet tolerance allowance - width 3%, length 5%.
Article No. Thickness
(mm)
3044288 1.5000
3044289 2.0000
3044290 3.0000
3044291 4.0000
3044292 5.0000
3044293 6.0000
3044294 7.0000
3044295 8.0000
3044296 9.0000
3044297 10.0000
3044332 11.0000
3044298 12.0000
3044299 13.0000
3044300 14.0000
3044301 15.0000
3044333 16.0000
3044334 17.0000
3044335 18.0000
3044336 19.0000
3044302 20.0000
3044337 21.0000
3044338 22.0000
3044339 23.0000
3044340 24.0000
3044303 25.0000
3044341 26.0000
3044342 27.0000
3044343 28.0000
3044304 29.0000
3044305 30.0000

Details

Suitable for military applications that require an easily deformed, low compression set sponge suitable for seals and gaskets. This product also meets both FAR 25/ JAR 25/ CS and 49 CFR 571.302 horizontal flammability tests. The closed cellular structure protects against water absorption and dust ingress to IP65. MOD AFS silicone sponge sheeting is also approved by the WRAS (Water Regulations Advisory Service) at temperatures up to 85°C.

This rubber sheeting is available with pressure sensitive adhesive backing. Polymax also provide a fabrication service to create gaskets or strips - please call us for more information.

Please note, this product is manufactured to order and minimum quantities may apply.

Additional Information

Colour White
Material Silicone (VMQ)
Roll Length (m) 2000
Width (mm) 1000.0000
Maximum Temperature (°C) 260.0000
Minimum Temperature (°C) -60.0000
Density (g/cm³) 0.2600
Tensile Strength (MPa) 1.3000
Elongation at break (%) 200.0000
Compression Set (%) 5.0000
Compression Set Testing Parameters 72h @ 150

Further Information (File Downloads)