Polymax Silicone tubing in peroxide cured translucent is suitable for applications that do not require high purity, critical dosing or repeated sterilisation. Commonly used for a variety of pump and transfer applications including industrial and automotive applications. The curing process may produce peroxide and ketone by-products, but the material still meets FDA guidelines.
The tubes are able to withstand a high temperature of 200°C (intermittent) and are available in various internal diameters and wall thickness. Other sizes are available on request.
|Internal Diameter (mm)||4.8|
|Wall Thickness (mm)||2.4|
|Hardness (Shore A)||60|
|Maximum Temperature (°C)||200|
|Minimum Temperature (°C)||-40|
|Elongation at break (%)||440|
|Tensile Strength (MPa)||11|
|Compression Set (%)||31|
|Compression Set Testing Parameters||22h @ 175|