+44 (0) 1420 474123
£ British Pound Sterling (GBP)
Change currency:
  • € Euro (EUR)
  • Rs. Indian Rupee (INR)
  • zł Polish Zloty (PLN)
  • $ US Dollar (USD)
You have no items in your shopping cart.
Free Delivery for orders under 15 - Select Free Shipping at the checkout process

Polymax Standard Rubber D-Fenders and Delta Profile

Quick Overview

Polymax rubber D Fenders Delta Profile fenders have a higher energy absorption capacity and hollow section to help absorb impacts as compared to similar sized cylindrical fenders.

These fenders are made from resilient NR/SBR rubber compound and are available in a wide variety of standard stock sizes and types and a non standard sizes and lengths available to be made to specific lengths with minimum make quantities.

Site Safety Brochure

Article No. Profile Drawing Width (mm) Height (mm) Length (mm) Price Qty
Polymax D-Fender 30mm x 12.5m x 16mm thick 6001106 301612500
Polymax D-Fender 50mm x 2.5m x 30mm Thick 6001105 50302500 Out of Stock
Polymax D-fender 50mm x 2.5m x 38mm Thick 6009690 50382500
Polymax D-Fender 52mm x 2.5m x 60mm Thick 6001104 52602500
Polymax D-Fender 70mm x 2.44m x 70mm Thick 6001100 70702440
Polymax D-Fender 75mm x 3m x 30mm Thick 6001113 75303000
Polymax D-Fender 92mm x 2.44m x 95mm Thick 6001101 92952440
Polymax D-Fender 98mm x 102mm thick x 2000mm long 6001103 981022000 Out of Stock
Polymax D-Fender 100mm x 3m x 40mm Thick 6001112 100403000 Out of Stock
Polymax D-Fender 100mm x 3m x 50mm Thick 6005300 100503000
Polymax D-Fender 100mm X 2m X 100 mm Thick, with 60x50 D slot 6010795 1001002000
Polymax D-Fender 100mm X 3m X 100 mm Thick, with 60x50 inner Hole 6010794 1001003000
Polymax D-Fender 100mm X 6m X 100 mm Thick, with 60x50 D slot 6010779 1001006000
Polymax D Fender 110mm x 3.0m x 90mm thick 6001102 110903000
Polymax D-Fender 150mm x 3m x 50mm Thick 6001107 150503000
Polymax D-Fender 150mm x 2m x 150mm Thick 6001108 1501502000
Polymax D-Fender 200mm x 2m x 150mm Thick 6001109 2001502000
Polymax D Fender 200mm x 200mm x 2m 6001111 2002002000


The Rubber D Section Fenders can be floor or wall mounted making them suitable for use on boats, in warehouses, on loading bays, ramps, in commercial vehicles etc and will suit almost any internal or external application. Holes are not pre-drilled on these fenders making it versatile enough to place the holes where you prefer, these can be added at an extra cost a drawing showing size and position will be required.

Please note the D Fenders dimensions are subject to +/- 10% tolerance

Additional Information

Colour Black
Material NR/SBR
Hardness (Shore A) 78
Density (g/cm³) 1.9
Maximum Temperature (°C) 70
Minimum Temperature (°C) -20
*Dimensions can vary, they are typical only.

Further Information (File Downloads)