The Type KPX mount employs two or more leaf springs used in opposing pairs to form an elliptical leaf spring assembly. The spaces between the leaves are filled with a specially developed damping compound.
There are eight standard sizes of KPX mount giving a load range of between 9 and 550 kg. These sizes are divided into three sub-groups based on their dimensions, with groups one and two being 51 mm (2") wide and group three being 102 mm (4") wide: 10 and 20; 45 70 110; 180 320 450.The standard range has been augmented to provide a wider load range and different options based upon the physical size of the mounts.
ApplicationApproved by the MoD for Naval use these mounts were designed and developed primarily to protect delicate electronic equipment against shock. They are also used in submarines for suspension and elimination of noise in confined spaces. In addition, they are used in engineering applications throughout industry, giving protection against starting torques, overload surges etc.
The KPX mount provides a space efficient shock mount design, which has unrivalled levels of damping. It also provides vibration isolation, not normally a feature of other shock mounts.
InstallationThe Type KPX mount can be installed in any orientation allowing equipment to be mounted to the deck, bulkhead, or deck head. Combinations can also be used where equipment geometry requires it e.g. equipment mounted to the deck and to the bulkhead.
The KPX mount uses a simple single bolt fixing method on each side of the mount which facilitates the installation of the equipment on board ship.
|NATO Stock Number||5340-99-923-5719|
|Supported Mass Range (kg)||35 - 55|
|Height Loaded (mm)||124|
|Height Unloaded (mm)||133|