-
Home
|
-
Polymax TEKNA, 1.4m x 10m, 4mm thick
Details
Also suitable for shot blasting applications where high abrasion resistance is required. Avoid use of TEKNA rubber sheet with acids, oils alkalis and other chemicals. TEKNA rubber matting has much higher tensile strength, elongation at break and lower hardness compared to our PROTEK sheeting.
Additional Information
| Colour |
Black |
| Material |
Natural Rubber (NR) |
| Roll Length (m) |
10 |
| Width (mm) |
1400.00 |
| Thickness (mm) |
4.00 |
| Hardness (Shore A) |
40 |
| Maximum Temperature (°C) |
70.00 |
| Minimum Temperature (°C) |
-20.00 |
| Density (g/cm³) |
1.02 |
| Tensile Strength (MPa) |
16.00 |
| Elongation at break (%) |
600.00 |
| Abrasion Resistance (mm³) (DIN53516) |
120.00 |
| Number of Layers of Fabric Reinforcement |
0 |
*Dimensions can vary, they are typical only.
Cookie Notice.
This websites use cookies. By continuing to browse the site you are agreeing to our use of cookies.
Cookie Settings