Where to use:
- POLYMAX ADESILEX VZ has a low viscosity and can be used with most substrates and also on vertical walls for immediate grip.
- Typical substrates include walls, floors, ceilings, wood, hardboard, metal and light alloys (in case of doubt always carry out a preliminary test on small test area)
- After setting POLYMAX ADESILEX VZ has high adhesion and elasticity.Resistance to temperature and ageing is also excellent.
- Not suitable for use on Fermacell building board.
Density: 0.9 g/cm3 ± 0.1
Brookfield viscosity: 4.000 cPs ± 1.000 ± rotor 4 - 20 RPM 2%
Dry solid content: 27% ± 1
Storage: 12 months in original sealed packaging.
Health hazard according to EEC 88/379: yes
Customs class: 3506 91 00
APPLICATION DATA at +23°C - 50% R.H.:
Application temperature range: +10°C to +35°C
Waiting time: maximum 20 minutes at +23°C
Development of the bond:: immediate at +23°C
Development of complete bond: few days depending on temperature
FINAL PERFORMANCE DATA
Resistance to moisture: excellent
Resistance to ageing: excellent
Test of adhesion PEEL 90° in compliance with DIN 16860 after 14 days at +23°C: homogeneous PVC: 1.8 N/mm
|Dry Solids Content (%)||27.0000|
|Max Coverage (m²)||16|
|Test of adhesion PEEL 90° (N/mm)||1.8|