Polymax - Mapei ECO VS90 Flooring, Matting Adhesive

For homogeneous and heterogeneous vinyl, PVC, polyurethane, polyester sheet and tile

WHERE TO USE

Interior installation of homogeneous and heterogeneous vinyl sheet and tile, semi-flexible vinyl and PVC tiles, polyutethane, Polyester and PVC backed carpets, woven, secondary backed and needlepunch carpets, rubber tile and sheet
On all normal absorbment and moisture stable substrates used in construction.
Suitable for flooring subject to high temperature conditions in service (for instance conservatories, etc...)

Typical applications

Porous Surfaces.

ULTRABOND ECO VS90 should be spread evenly over the floor surface with a 1.6 mm V notched (A2) trowell in a sweeping motion with the trowel at an angle of 60 °. and the floorcovering placed into the adhesive while it is still wet.

Download Datasheet

Article No.	Capacity (kg)	Estimated Coverage
3005015	10	aprox 40m²
3005023	5	aprox 20m²

Rubber Flooring Installation Guide

WARNING : Although the technical details and recommendations contained in this report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical applications; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

*Dimension can vary they are typical only