Details
Also suitable for shot-blasting applications where high abrasion resistance is required. Avoid use of TEKNA rubber sheet
with acids, oils alkalis and other chemicals. TEKNA rubber matting has much higher tensile strength, elongation at break and lower hardness compared to our PROTEK sheeting.
Additional Information
| Colour | Beige |
|---|---|
| Material | Natural Rubber (NR) |
| Hardness (Shore A) | 40 |
| Maximum Temperature (°C) | 70 |
| Minimum Temperature (°C) | -10 |
| Density (g/m³) | 1.04 |
| Tensile Strength (MPa) | 16.5 |
| Elongation at break (%) | 600 |
| Abrasion Resistance (mm³) (DIN53516) | 90 |
