Polymax Ltd
Call: 01420 474123
Fax: 01420 487816
Email: sales@polymax.co.uk

Home » Rubber Flooring » Rubber Flooring Adhesives » VZ Contact Flooring/Matting Adhesive

Minimum order value of only £10

Call: 01420 474123

Bookmark

Home

Email Us

VZ Contact Flooring/Matting Adhesive

Particularly suited for the fixing of rubber floor on vertical surfaces where immediate grip is required.

Where to use:

POLYMAX ADESILEX VZhas a low viscosity and can be used with most substrates and also on vertical walls for immediate grip.
Typical substrates include walls, floors, ceilings, wood, hardboard, metal and light alloys (in case of doubt always carry out a preliminary test on small test area)
After setting POLYMAX ADESILEX VZ has high adhesion and elasticity.Resistance to temperature and ageing is also excellent.

Further Information:
	RUBBER FLOORING INSTALLATION GUIDE [pdf]
	RUBBER FLOORING INSTRUCTION FOR USE [pdf]
	TECHNICAL SPECIFICATION [pdf]
	MATERIAL SAFTEY DATASHEET [pdf]

*Coverage is an estimate, based on using an A2 spreader. Different substraights can vary.

WARNING : Although the technical details and recommendations contained in this report correspond to the best of our knowledge and experience, all the above information must, in every case, be taken as merely indicative and subject to confirmation after long-term practical applications; for this reason, anyone who intends to use the product must ensure beforehand that it is suitable for the envisaged application. In every case, the user alone is fully responsible for any consequences deriving from the use of the product.

*Dimension can vary they are typical only

*Dimension can vary they are typical only

*New Saturday Opening Hours*
Opening Hours: Mon-Fri: 8am-6pm Sat: 8.30-5 (By Appointment Only)

TECHNICAL PROPERTIES

Consistency: liquid Color: beige Density: 0.9 g/cm3 ± 0.1 Brookfield viscosity: 4.000 cPs ± 1.000 ± rotor 4 - 20 RPM 2% Dry solid content: 27% ± 1 Storage: 12 months in original sealed packaging. Health hazard according to EEC 88/379: yes Inflammability: yes Customs class: 3506 91 00 APPLICATION DATA: APPLICATION DATA at +23°C - 50% R.H.: Application temperature range: +10°C to +35°C Waiting time: maximum 20 minutes at +23°C Development of the bond:: immediate at +23°C Development of complete bond: few days depending on temperature
FINAL PERFORMANCE DATA
Resistance to moisture: excellent Resistance to ageing: excellent Test of adhesion PEEL 90° in compliance with DIN 16860 after 14 days at +23°C: homogeneous PVC: 1.8 N/mm